Give you a caring night ride---reflective pedals !

City Bike Pedals --- M-904

The basic purpose of pedals is pedaling. The requirements are impact resistance and pedaling resistance. The bearings must withstand friction and be light in weight.

The pedal components are assembled on the left and right cranks of the bottom bracket components. It is a device that converts the horizontal force into rotation force. When the bicycle is riding, the pedal force is first transmitted to the pedal components, and then the pedal shaft rotates the cranks and chainrings. , the bottom bracket, the chain flywheel, the rear wheel rotates, so that the bicycle can move forward. Therefore, whether the structure and specifications of the pedal components are appropriate will directly affect whether the rider's foot position is appropriate and whether the bicycle can be driven smoothly.

Pedals can be divided into integral pedals and combined pedals. No matter what style of pedals, they must have a pedal surface, must be safe and reliable, have a certain anti-skid performance, and can be made of rubber, plastic or metal materials. The pedals must be flexible.

Specification list :

What is good quality?

1. Carefully polished, clear thread, safer and more intimate

2. The tread is equipped with anti-skid nails to increase friction

3. Made of high-quality plastic, lighter and more wear-resistant

4. Ergonomic design, more suitable for adults to ride

5. Highlighted reflectors on both sides, caring for night riding

Installation instructions:

The L and R marked on the pedal represent the left (L) pedal and the right (R) pedal. The left pedal is screwed counterclockwise for the counter-thread, and the right pedal is clockwise. The threaded port must be tightened at one time!

PS :

New pedal use may be a bit tight, just run in for a while, and please pay attention to distinguish between left and right, L/R.